Blodgett Mark V XCEL Specifications download pdf (Page 7)

Installation

Delivery and Location

DELIVERY AND INSPECTION

All Blodgett ovens are shipped in containers t o

preventdamage. Upondeliveryofyour new oven:

Inspecttheshippingcontainerforexternaldam-

age. Any evidence of damage should be noted

onthe delivery receiptwhich mustbe signedby

the driver.

Uncrate the oven and check for internal dam-

age. Carriers will accept claims for concealed

damage if notifiedwithin fifteen days of delivery

and the shipping container is retained for in-

spection.

The Blodgett Oven Company cannot assume

responsibility for loss or damage suffered in

transit. The carrier assumed full responsibility

for delivery in good order when the shipment

was accepted. We are, however, prep ared to

assist you if filing a claim is necessary.

OVEN LOCATION

The well planned and proper placement of your

oven will result in long term operator convenience

and satisfactory performance.

The following clearances must be maintained be-

tween the ovenand any combustible or non-com-

bustible construction.

Oven body right side --- 0” (0 cm)

Oven body left side --- 0” (0 cm)

Oven body back --- 0” (0 cm)

Oven body bottom --- 1/2” (1.2 cm)

Thefollowingclearancesmustbeavailableforser-

vicing.

Oven body sides --- 12” (30 cm)

Oven body back --- 12” (30 cm)

It is essential that an adequate air supply to the

oven be maintained to provide a sufficient flow of

combustion and ventilation air.

Place the oven in an area that is free of drafts.

Keeptheovenareafreeand clearofallcombus-

tiblessuchaspaper,cardboard,andflammable

liquids and solvents.

Do not place t h e oven on a curb base or seal to

awall.Thiswillrestricttheflow ofairandprevent

proper ventilation. Tripping of the blower mo-

tor’s thermal overload device is caused by an

excessive ambient temperature on the right

side of the oven. This condition must be cor-

rected to prevent permanent damage to the

oven.

Beforemakinganyutilityconnectionstothisoven,

check the rating plate to be sure the oven specifi-

cations are compatible with the electricalservices

supplied for the oven.

1. Openthe doors,the ratingplateislocatedun-

der the top edge of the oven.

1 2 3 4 5 6 7 8 9 10 11 12 ... 36 37

Comments to this Manuals

No comments

Blodgett Mark V XCEL Specifications Page 7

Comments to this Manuals

Related products and manuals for Ovens Blodgett Mark V XCEL