Blodgett Mark V XCEL Specifications download pdf (Page 12)

Installation

8

Electrical Connection

Wiring diagrams are located in the control

compartment and on the back of the oven.

The electric motor, indicator lights and related

switches are connected to the oven as follows:

1. Remove the bottom trim and control panel

covers. Slide the control panel forward.

2. Connectthesupplyconduittothewireductlo-

cated in the lower left hand corner on t he back

of the oven.

3. Run the supply wires through the duct to the

front of the oven.

4. Connect the supply wires to top of right con-

tactor in the control compartment at the lower

right corner of the oven.

5. Reinstall the bottom trim and control panel

covers.

NOTE: To prevent damage there is no power to

the heating elements when the blower is

not operating.

THE BLODGETT O VEN COMPANY CANNOT AS-

SUME RESPONSIBILITY FOR LOSS OR DAMAGE

SUFFERED AS A RESULT OF IMPROPER INSTAL-

LA TION.

Install incoming

power on this

contactor

Figure 7

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 36 37

Comments to this Manuals

No comments