ZEPHAIRE-100-ECONVECTION OVENINSTALLATION - OPERATION - MAINTENANCE(Formerly ZEPHAIRE-240E PLUS)BLODGETT OVEN COMPANYwww.blodgett.com44 Lakeside Aven
8InstallationOven AssemblyDOUBLE SECTION ASSEMBLY1. Secure the short legs to the bottom sections as de-scribed.2. Place the upper section in positio
9OperationSSM Solid State Manual Control with 60 Minute Electro-Mechanical TimerLIGHT OFF OVEN READYBLOWERHILOWOFFLIGHTSOFFONCOOLDOWNCOOKMODE1456732Fi
10OperationSSD Solid State Digital ControlBLOWERHILOWOFFLIGHTSOFFONCOOLDOWNCOOKMODE1459321467812101113Figure 9 CONTROL DESCRIPTION1. CAVITY LIGHTS ON
11OperationTo set the hold time:1. Press HOLD key (12) to turn hold mode on.NOTE: HOLD light is on.2. Rotate dial (8) to enter the hold temperature
12OperationGeneral Guidelines for Operating PersonnelCOOK TIMES AND TEMPERATURESPreheating the ovenAlways preheat the oven before baking or roasting.
13OperationSuggested Times and TemperaturesPRODUCT TEMPERATURE TIME # SHELVESMeatsHamburger Patties (5 per lb)Steamship Round (80 lb. quartered)Standi
14MaintenanceCleaning and Preventative MaintenanceCLEANING THE OVEN WARNING!!Always clean the unit when it is cold. WARNING!!Be sure to read and follo
15MaintenanceTroubleshooting GuidePOSSIBLE CAUSE(S) SUGGESTED REMEDYSYMPTOM: Elements will not heat• Oven not plugged in.• Power switch on the contr
Your Service Agency’s Address:ModelSerial numberOven installed byInstallation checked by
IMPORTANT WARNING: Improper installa-tion, adjustment, alternation, service or maintenance can cause property damage, in-jury or death. Read the inst
2InstallationOven Description and SpecicationsELECTRICAL RATINGS VOLTAGE HZ KW PHASEMAX LOAD (AMPS) ELECTRICAL CONNECTION AWG*L1 L2 L2 N208 60 11 1 5
3InstallationDelivery and LocationDELIVERY AND INSPECTIONAll Blodgett ovens are shipped in containers to prevent damage. Upon delivery of your new ove
4InstallationUtility Connections - Standards and CodesTHE INSTALLATION INSTRUCTIONS CONTAINED HEREIN ARE FOR THE USE OF QUALIFIED INSTAL-LATION AND SE
5InstallationElectrical ConnectionsELECTRICAL CONNECTIONThe electric motor, indicator lights and related switches are connected to the oven as follows
6Installation Oven AssemblyNSF BOLTSThese bolts are required by NSF to block any exposed hole on the back of an oven. This includes:• any unit, sing
7InstallationOven AssemblyLEG ATTACHMENT1. Push the oven onto a lift with the bottom of the oven down.2. Align the threaded stud in each leg with th
Comments to this Manuals