Blodgett KLT-E Series User Manual download pdf (Page 6)

4 OM-KLT-E

The Blodgett KLT-E is a ﬂoor-mounted, tilting, steam jacketed kettle with a

thermostatically controlled, self-contained, electrically-heated steam supply and

appropriate controls, mounted on a sturdy base. The kettle is available in 20, 40 or 60

gallon capacities.

The body of the kettle is constructed of stainless steel, welded into one solid piece.

The kettle is furnished with a reinforced rim and a butterﬂy shaped pouring lip. It has a

steam jacket rated for working pressures up to 50 PSI. Kettle ﬁnish is 180 emery grit

on the inside and bright semi-deluxe on the outside.

The kettle can be tilted with a hand crank to pour out its contents. Stainless steel

panels enclose the controls and the base. Four stainless steel, tubular legs support the

unit. Bullet feet on each of the legs can be adjusted to level the kettle.

A built-in steam generator, sized for the kettle capacity and heated by electricity,

delivers steam into the jacket. “Airless” operation of the steam jacket permits uniform,

efﬁcient heating at temperatures as low as 150°F and as high as 298°F. In addition to

the adjustable thermostat for operating control, the unit has a tilt cut-off switch, low

water cut-off, safety valve, and high limit pressure switch as safety features. A heating

indicator light, pressure gauge, and sight glass are provided for monitoring kettle

operation.

A single electrical connection is required for installation. The unit may be ordered

for use with 208/240, 400 or 480 volt power. All kettles are wired for three-phase

operation. Single-phase units are also available.

KETTLE CHARACTERISTICS

Type 20E-KLT 40E-KLT 60E-KLT

Capacity

20 Gallon

(75 liter)

40 Gallon

(150 liter)

60 Gallon

(225 liter)

Inner

Diameter

20 in

(508 mm)

26 in

(660 mm)

30 in

(762 mm)

Rim Height

39 in

(991 mm)

40 in

(1016 mm)

44 in

(1118 mm)

Width

38 in

(965 mm)

42 in

(1067 mm)

47 in

(1194 mm)

Front-to-Back

28 in

(711 mm)

32 in

(813 mm)

35 in

(889 mm)

Optional equipment available with kettles:

1. 2” or 3” diameter tangent draw-off (product valve)

2. Lift-off, hinged and power-assist covers

3. Water ﬁll faucets

4. Basket cooking system

5. Kettle brush kit

6. Gallon etch marks

Equipment Description

Thermostat Dial

Indicator Light

Tilting Cra

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments

Blodgett KLT-E Series User Manual Page 6

Comments to this Manuals

Related products and manuals for Kettles Blodgett KLT-E Series